It Rained and I Dont Want to Wash My Car Again
Author
Reply to Pattie Lessel
What stain brand and type did you utilise? Post some pics in the comments.
This was posted as an answer to question. This is non the right reply. They asked about a porch that has a roof.
Author
Reply to Cher
Sorry only we do not understand your comment.
How can we cleaned a stained deck
Volition hit the deck work on a stained deck with blackness mould on it
Author
Reply to Barbara
We do not understand your question.
seven months ago
And then I cleaned and brightened my deck but the last week has had some random low-cal showers, and so I haven't had the 72 minimum window to let the deck dry, stain and cure earlier more than rain comes.
I was wondering whether I could get some plastic sheeting to cover the deck and rail when I know it's going to rain so that the deck doesn't get soaked again and I tin uncover it when information technology's prissy enough to allow it to continue drying or fifty-fifty get-go staining if it'due south already dry at that indicate?
Author
Reply to Michael Lanich
Practice not comprehend it. Simply let it dry out for 48 hours after rain before staining.
Hi,
Deck stain was applied yesterday. As information technology'south drying, I am noticing the post-obit:
ane. some lines in a portion of the deck
two. some fuzzies and white balance – these came near during the prep, but I expected them to be gone subsequently staining
(The person applying the stain did walk across a couple of times holding a rag moisture from water, or holding the paint tray/brush with stain in it . A push button mop with a rag tied around it with a string at each terminate was also used to wipe the floor of any backlog stain. Not sure if any of this might be related)
My questions:
1. Any idea why the lines are there and how to fix it?
two. What to do about the fuzzies and white residue – Will this go abroad on its ain in a few weeks?
Thanks.
Last edited 7 months ago by S.thou
Writer
Reply to s.one thousand
1. Looks like roller marks maybe from grill or article of furniture. You cannot set them exterior of removing all stain and starting over.
2. No, information technology does not go away.
Answer to Deck Stain Help
Howdy,
i. There was actually a grill there with wheels that they moved, so that would make perfect sense. I might need to ask them to sand that section and re-stain there, volition that work?
2. Could you please clarify your 2d response – what does not go away, the fuzzies or the white residual/spots around the knots? What caused this and how do I fix it?
Give thanks you
Last edited seven months ago by Southward.k
Author
Reply to s.g
1. You cannot spot fix, you would have to remove all and start over.
2. Same are #1 with the fuzzies and white residuum.
seven months agone
We stained our covered deck with oil based stain. Information technology became very foggy and had tons of wet on it. It dried in some areas but is super "shiny" in others and seems gluey still in the shiny areas. Information technology'southward now been 5 days of nice weather. What practice nosotros do….. thank you for your assist!!
Author
Respond to Catherine McLeod
Remove backlog stain with rags and mineral spirits. Saturate oily rags in water when done to avert spontaneous combustion.
7 months ago
Reply to Deck Stain Help
Is at that place a mineral spirits product you would recommend?
Author
Reply to Catherine McLeod
Any.
7 months ago
Respond to Deck Stain Aid
Mineral spirits didn't work. Some parts are nonetheless "gluey" and shiny. What'south side by side ? Do I have to sand it? Could I put a clear sealing coat over the whole affair and then it will all simply be shiny : )
Author
Reply to Catherine McLeod
You cannot acme coat it. It will brand it worse and it will peel. If it does not cure and dry on its own in a few weeks then you will take to remove information technology fully and start over.
7 months agone
Oh and I do plan to use one of your recommended brands when we redo side by side jump. Unfortunately I came across your website afterwards the fact! Oh well! Lesson learned!!
7 months ago
Nosotros live in western Washington country and applied Australian Timber Oil to our deck that has not been maintained since being built about 14 years ago. We cleaned it and force per unit area washed it commencement and allowed it to dry. Of course it rained that night. The sections under the roof seemed to off-white okay and are dry but the sections that got rained on are still kinda tacky. Even after drying all the style. When it rained actually hard over the weekend the water seemed to seep into the stain and information technology created a yellow kinda moving picture on the top that I could scrape off with my finger boom. Is in that location annihilation I can do to get rid of the gluey parts to keep excess clay and crud from collecting over the winter? I know this is nigh likely a start over in the spring state of affairs merely it'd be prissy if it wasn't sticky all winter. Thanks for any advice. I'll adhere pics of the dry deck. The lighter spots are where the yellow pic forms when it's wet.
Author
Reply to Corrie Ariens
The only thing yous can do is remove all and showtime over.
Hi, similar story to others here: I remember unexpected rain might take messed upwardly the deck seal we practical. Either that or I was a flake heavy handed in applying the deck seal.
It's a new deck and we used Behr transparent deck seal. Information technology rained maybe 6-viii hours after we sealed the deck. It was overnight so I couldn't tell how hard it rained but in that location was water pooled on the deck the next forenoon.
Question is: should nosotros pressure wash and re seal information technology or is it okay for the upcoming winter? What do you recommend?
Author
Reply to Shannon
Transport pictures after the rainwater has dried off for help on how to ready.
Answer to Deck Stain Help
Sorry I thought the pictures were loaded! Here they are.
Reply to Deck Stain Help
Notice in some areas the color is more than saturated and shiny despite it feeling completely dry.
Author
7 months ago
It rained very heavy and persistent the next day subsequently my first h2o based staining. When can I use the recommended 2nd coat.?
Author
Respond to Maud O'Leary
That depends on the brand of stain and if you or cannot employ another coat afterward it has cured.
8 months agone
Hi Support Team
I painted my garden boxes, within and outside with Pure 100% Linseed oil and information technology rained 12 hours afterward. A real down pour all solar day. It looks like the rain has washed of most of the oil. When I started we were not expecting rain for four or five days so am actually upset that I have wasted my fourth dimension and coin in painting the boxes with oil. So what happens now.? Do I have to wait for them to dry to recoat.? The stain was applied to garden boxes not decking so is the procedure the same as decking..
Author
Answer to Doris Swansson
Strip it and redo it with a proper forest stain, not directly oil. Use TWP or Armstrong Clark stains.
8 months ago
Reply to Deck Stain Help
I alive in Australia so not familiar with the TWP or Armstrong Clark stains. Every bit they are garden boxes and I will be planting vegie and herb plants in them, and then are these stains food rubber or will they leach into the soil and contaminate whatsoever plants are sown in them. I am new to garden boxes then not certain what to use to waterproof the within of the boxes. Have read that Linseed or tung oil is all-time for this purpose any info would exist gratefully appreciated.
Had a contractor come out to stain my decks and debate. He used Thompson'south Water Seal on the contend and Cabot'southward Australian Timber Oil on the decks. Started to rain equally he was finishing upward and now have some white bubbly patches on fence and decks looks unevenly stained. Does he need to come back out to reapply?
Writer
Reply to Apr
You will have to redo fully. Start over.
Reply to Deck Stain Help
Like, restain everything all over once more?
Author
Answer to April
As in you lot will have to remove the coatings kickoff and and then restain.
Answer to Deck Stain Help
Oh, no. 😓 Thanks for your aid @ Deck Stain Help!
Last edited eight months ago by April
I power done & "sealed" this table with Thompson'south Water Seal (oil based/clear). The get-go week the table looked fantastic. And then we had a hard rain about 3 weeks afterward staining and now have water spots. How can this be fixed?
B4 sealing, We power done the table & permit it dry >4 days. Water seeped into the wood, no beading.
Waited for dry out days at 70-80 degrees to apply stain. Applied ane glaze and let information technology dry in shade 3 days(73 hours).
We started using the table. H2o beaded on surface and information technology looked perfect.
Now, three weeks post stain, had a heavy rain a couple days agone. The table ow has water spots all through the water sealer.
What happened? How do we set up this?
Author
What do I do? Here'southward pic of white blotches and some even so wet afterwards 24 hrs.
Writer
Reply to Lori
Pressure launder off the blotches and so lightly recoat all.
Reply to Deck Stain Help
Thank goodness information technology's on the railings. I will practise that (pressure wash then recoat). Thank you for your quick answer. Truly appreciated 😊
Here is the moving picture
Can anyone suggest a remedy for this…this is the second coat of Cabot deck right and information technology rained ten after applying.
Writer
Reply to Phil
You would have to recoat it.
I put a clear 'no nonsense' h2o based stain on my decking. Afterward existence caught out with rain shortly later on the decking has left a cloudy / milky look in sure areas. Would some other coat gear up this?
Author
Reply to Eamon
No, you would take to remove it and then employ a proper stain.
10 months ago
I put downwardly a Thermory kiln dried spruce deck, and am fix to glaze it with their Cutek wood protecting oil. The Cutek says non to use if wood contains more than 17% moisture, but I don't take a gauge, and really need to do it today. It rained twenty-four hour period before yesterday ( a midnight torrent), was dry out yesterday and today (sunny) – do you think I'chiliad good to get? (No rain in the forecast now). Thanks!
Author
Reply to Jackie Tileston
It is most likley okay to stain.
11 months ago
I started staining my deck rails and spindles today. Using Cabot solid colour acrylic stain and sealant. Finished upwards for the day at 6pm. And theres a chance of rain after midnight. Should I be worried? Seems to be drying fast. Thank you
Writer
Respond to Debbie Potter
You should be fine.
- Contractors cleaned and re-stained our deck with Sherwin Williams SuperDeck semi-transparent oil based stain. It rained most iv hours later, a quick downpour, and so cleared upward. The water sitting on the deck made the area nether it look pink when the sun hits it (first picture) just looks perfectly fine when dry (third picture). I waited a total day (recommendations on the tin can say not to apply within 24hrs of pelting) afterwards and put some more water on the area and got the same pinkish look nether the sunday, but the moisture deck out of the sun (second picture) looks normal . The contractor has agreed to come back and sand and refinish if we want, but I am wondering if that is necessary if the deck looks good when dry.
Author
Reply to Bob Daffer
I think yous are fine and it only has not fully cured yet. I would not worry about it.
eleven months ago
I oiled our new deck last month with Intergrain universal timber oil. Information technology rained the next day virtually 9 hours after. In that location were patches later on the water dried.
I sanded it dorsum when nosotros had a few adept sunny days and reoiled. Information technology still has patches and now has white marks on some boards. Encounter pictures attached. Nosotros are in Commonwealth of australia and weather condition is cool
Author
Reply to Leanne grisold
You lot will need to remove and start over.
xi months ago
Reply to Deck Stain Help
Is the best style to sand it back again to remove the stain or is in that location something else.
Author
Answer to Leanne Grisold
Sand or strip.
eleven months ago
I looked on my weather app and information technology stated no rain for the side by side 7 days. I started staining a pino deck that is 6 months old. It started raining and I am so upset! I am using a solid stain from Behr. I am at a loss as what to do now. Any help or suggestions would be profoundly appreciated. Give thanks you lot
Writer
Answer to Lynette Borror
Let information technology dry and then recoat all over again.
I stained my deck two years ago and in that location was some rain spots on information technology subsequently it dried. How can I remove these water droplets? I am getting ready to resand my deck and would similar any suggestions as to how to set this problem. Thanks
Author
Reply to Marc Hall
You cannot fix this outside of sanding it down to the bare woods or coving with a new glaze of solid stain.
We stained our deck about 2 years agone. I think in that location was some dew that formed overnight and information technology has since added to the rainspots on the deck. Please look at the pictures and allow me know if in that location is anything we tin can do? Or any suggestions before I apply another new coat of stain to the deck? Will restaining it brand information technology go away?
Would using fans to help dry out the freshly stained deck with unexpected pelting help to go along stain from being displaced
Author
Reply to Edna Bourgoin
Probably not much if at all.
1 yr ago
How long after staining a argue volition it exist affected by pelting?
Author
Respond to Dennis Reasner
Depends on the brand, type of stain, and how long it takes to dry. Not i answer for all.
1 twelvemonth ago
Nosotros wanted to take the Pergola painted tomorrow with the sealer stain and sealer product and it's supposed to rain on Tuesday I'one thousand wondering if that is plenty fourth dimension in between to paint the Pergola without whatsoever impairment
Writer
Depends on the brand, blazon of stain, and the temperature. No mode to answer this exactly equally all stains and atmospheric condition are unlike.
I used SW Super Deck IR reflective semi solid stain on my gunkhole dock. It came a downpour well-nigh 4 hours after applying. At that place are a few bare spots now and the rain didnt bead upward like i thought it should. The bare spots dont concern me terribly equally I tin touch those up simply shouldn't the rain dewdrop on Semi solid stains???
Author
Reply to Jon
Typically no, water should non bead off a deck stain. It sheds off if a breathable stain.
1 twelvemonth agone
What is the best brand of stain to use on your wood to protect it from the pelting
Author
Reply to Theron Rutledge
Information technology rained two hours after finishing applying the final glaze.
Product used was Intergrain DWD
Author
Respond to Lucas
Yous cannot spot fix. You volition need to remove all and start over.
I'm in Northern California and the long, dry summertime just came to an end before getting to a new project using Sansin Stain. In that location is forecasted about a week of articulate weather after a few days of rain. But the morning time dew can exit everything pretty moisture. I'm wondering if its alright to stain the projects, or try to reschedule for jump
Writer
Reply to Aldo
Wating until Spring will be fine to prep and stain.
Forgot to attach photos for the below post
Author
Reply to Leon
Y'all will need to remove it all and start over to set this.
We stained our back steps yesterday and co-ordinate to the weather condition report were clear for rain within the viii hour window the stain requires before it's waterproof. Withal a huge thunderstorm storm came in merely as nosotros were packing upwards terminal night.
I tried to put a tarp over it as best I could, given the situation, loud swearing and cursing the sky was involved, only a lot of h2o even so got in.
Nosotros used Olympic Maximum semi-transparent stain + sealant.
Some parts are still tacky 22 hours later on. Should I try and get covered over again before the next pelting tonight or is the impairment done and I shouldn't carp? Will information technology get worse if it gets wet once again at this phase?
Once the rain has left am I able to repair the damage or exercise I need to showtime again?
We may not have thought weather again until bound will it be protected with what's on it now for wintertime?
Thanks for your assistance.
Hello – Our deck is 12 years old, treated pino. The get-go time we stained the deck a few weeks agone, nosotros first used Behr Wood Stain and End Stripper using a wire brush. And then we used Behr All In Ane cleaner to clean the deck. Later on 24 hours of drying we stained the deck using Behr Semi-Transparent Waterproofing Stain and Sealer. We did not realize it at the time just within 12-24 hours we had a weekend of pelting (not hard) from a tropical tempest. The stain was peeling up in several places after the weekend of rain to our disappointment, and to farther add insult, nosotros ended up actually not liking the color. We were most concerned about the peeling, so we ended up using Behr Forest Stain and Finish Stripper and the wire castor again to completely scrape the new stain off the deck. We did non apply the All in In one case Cleaner this time because we figured we had just used it and the wood should be clean. Information technology certainly looked clean, cleaner than the first time. We allow the deck dry out for a few days this time then applied a unlike color of Behr Semi-Transparent Waterproofing Stain and Sealer a little over a week agone. It had over 24 hours to all dry out before rain. Information technology rained this by weekend and the stain started immediately started peeling up. You could walk out on the deck during the rain and you could literally smear it with your anxiety. The attached pictures show what it looks similar now after it's dried for a few days. Seems to be getting worse. Do yous know what virtually likely happened and what nosotros should exercise? Thank you for your assistance!
Author
11 months ago
Answer to Deck Stain Assistance
Boy y'all are not kidding! We used Behr premium deck over on our s facing deck a few years ago, and it ruined the deck! Nearly boards are now rotted considering the deck over got piffling holes on the surface that trapped h2o underneath, it's awful!!! We have now cleaned, sanded, and filled much of the damaged forest and nosotros'll exist priming and painting the deck with Kilz porch deck and floor paint.
Light pelting started just as we finished applying Pittsburgh Ultra Advanced Semi-Transparent to our cedar deck. At present information technology looks like this. What should we do?
Author
Respond to Rob
Y'all volition need to remove it all and start over. Strip and or sand. Brightner after. Probably will need to do all floors and so information technology looks even. The rails look okay.
1 yr agone
We stained our Deck starting at iv:00pm yesterday (Friday) because we finally got a break in our conditions and had v days prior for our woods deck to dry out. It looked good last night only this forenoon the deck looks horrible because we have so much to dew. We live in Washington land and it is moist this fourth dimension if twelvemonth. Over the past couple months nosotros tried to strip the paint using Smart Strip which was not successful, and we have sanded and pressure level washed multiple times to prep. Nosotros used Sherwin-Williams Super Deck pigment with a an anti mildew additive final night (thou-one avant-garde mildew treatment). I have attached our weather forecast as well. Whatever suggestions? Wait untill spring to put on a 2nd glaze or put a 2d coat on Lord's day?
Writer
Reply to Michelle Murphy
Wait until Spring equally you may have to remove the Super Deck.
Hi. Five days ago we had our deck and boardwalk stained with a sprayer then it started raining three hours later. Information technology has rained intermittently since then. H2o seems to be pooling on both for long periods. Delight encounter photos attached and advise whether to re-stain.
Author
Reply to Omey
Ship pictures when the water dries off.
Respond to Deck Stain Help
Water has dried off. Here are new photos. Thanks.
Reply to Deck Stain Help
The water has dried off. Here are new photos. Thanks.
Answer to Omey
The water has dried off and here are new photos. Thanks.
Author
Respond to Omey
It is fine, leave as is.
Hi there,
I have a few questions to ask you:
A. I spent a whole day staining the deck on Sunday but rain started last dark, Mon, at 8 pm. It lasted till around 4:thirty am and the full book was about 20 mm. So the stain was permit dry between 26 to 36 hours before the rain. I got upward at v:30 to wipe the deck and I could feel in that location was water beaded on elevation, and the water in the saucepan was kind of clear. At present at 12:30pm the deck is dry out and I am taking some photos for you to see if in that location is water damage on the deck.
The stain I used was Cabot Australian Timber Oil honey teak. The label says drying fourth dimension is near 24 hours but when I called, they recommended 48 hours no rain.
B. It's sunny today but information technology will pelting once more tomorrow forenoon. Should I cover the deck tomorrow? I was actually thinking about covering the deck with plastic sheets concluding dark but rain simply started before I got to lay the plastic sheet on so I gave up.
C. Another question is (run across phone #four), I found I missed some areas between the boards. Should I stain these areas? If stain bleed over to the areas already stained, volition there be a trouble? They say this oil is for one application only.
Thank y'all so much! I was and so relieved when I found this updated post.
P.S. I am at Toronto and it is getting cold at present. Roughly ten at night and 20 during daytime this week.
Author
Respond to Angela Huang
It looks fine, practice non add anymore stain as information technology will not dry correctly. No need to cover tomorrow. We would non worry about touching up betwixt the boards.
Reply to Deck Stain Help
Thank y'all for the quick response. Attached a photo for the areas betwixt boards. A piddling bigger than I'd like to see. No need to touch up at all?
I have some very fine bristle brushes used for oil painting that tin can reach deep down in that location. I tin can attempt not to touch the areas already stained. Worth trying?
Writer
Reply to Angela Huang
If you touch these spots upwardly, wipe the excess off right away where information technology gets on the pinnacle of the lath where it is already stained.
Howdy. We stained our deck using semi-transparent acrylic/oil stain (Dulux; CWF-UV5). Because the weather forecast changed to pelting for the next calendar week or so we paused the project.
Can we encompass the unfinished section of the deck with tarps? By unfinished I mean those areas that accept been force per unit area done and sanded but NOT seen whatever stain yet?
The stain has dried but some deck planks were halfway stained (i.e. half the length). Can nosotros just proceed applying the stain once the weather is proficient over again/the wood is dry out (trying non to overlap/overcoat the previously stained areas)? We might have to wait until next leap due to bad weather forecasted.
Would we need to sand the deck again if left covered by tarps throughout the wintertime?
Thanks!
Author
Answer to Tanya
Do not cover. If y'all stain this year, just make sure you lot have two days of drying. If yous stopped in the middle of a board, it will not blend when you cease staining.
Respond to Deck Stain Assistance
Is it bad to linseed oil a trailer deck so embrace it 2 days later to continue water off
Author
Reply to Erik
It would not help and could create issues.
We cleaned the black mildew off of our mahogany deck using TSP substitute solution with bleach and a plastic-bristle brush, in accordance with the cleaner directions (because power washing didn't remove the black). It has been a very dry summer and the deck dried for 48 hours before we applied a coat of Benjamin Moore transparent Arbor Coat. Despite a forecast of three more dry days, it started to drizzle when nosotros were virtually finished and it continued to pelting lightly overnight and this morning. It'due south dry now and information technology looks awful. What should we do?
Writer
Reply to Judy
You will need to remove all and start over to fix this. Strip off what yous can, sand the rest, brightener last.
i yr ago
I had my deck stain 3 days ago and it poured today now it is all white. Tin you tell me what to do please help
Author
Reply to Jacquelin Woods
We would need pictures and also what stain brand and blazon that were used?
I stained my deck it rained 2 hours later.. three days later it's withal tacky. Will it dry?
Writer
Reply to Tiffany
Hard to say. Depends on the brand and type of stain? Pictures would aid as well.
Nosotros apply TWP following the instructions, now nosotros have some discoloration, some woods expect dark and others lighter. Should we use a more TWP cloth on the lite areas to unify the color?
Author
Respond to James
It is non possible to spot employ and have information technology alloy. You would accept to recoat all.
Just washed my deck with proper cleaner but now calling rain for 8 days or so, volition I need to wash it again? Thank y'all.
Author
Reply to Yves
Yous should exist okay every bit long as you stain within 2 weeks or so of the prep.
1 yr ago
Nosotros ability washed our deck. Before we could pigment it, wet weather moved in. That was nearly iii weeks ago. At present the atmospheric condition is groovy for painting. In that 3 weeks we ago walked on our deck. Do we need to rewash the deck before painting it?
Author
Answer to Susan Shreiner
Yes, rewash lightly.
Force per unit area done and sanded our rather old mahogany deck. Applied Australian Timber Oil in Mahogany Flame. We had unexpected rain about 16 hours subsequently and it'south lasted for two days. Now some boards are even so beading simply others expect very flat. With fall quickly approaching I was wondering if the deck would have plenty protection for the winter and I could resand it and stain it in the autumn, or if it'due south completely shot and I need to redo information technology this year
Writer
Respond to Alex
It is fine for the Winter. Clean and recoat next year.
Answer to Deck Stain Help
Thank you!
Hullo I started the process of h2o sealing my wood debate with cabot articulate wood stain information technology hadn't rained 48 hours earlier and wasn't supposed to rain for 48 hours later on however I live in NC and the weather is all over the identify and then the weather could call for no rain and 10 minutes subsequently it could change. I got 1/3 of the debate done and it started raining in the procedure 😠it had only been on for 30 minutes now I dont know what to do I am a novice at this. We had a good downwardly pour for about 3 to 5 minutes and now I don't know if its ruined and if so how do I get about fixing it. Your help is greatly appreciated! Thank you 😊
Writer
Reply to Lara Horn
Note on Help with Pelting on your Deck Stain
-Earlier asking a question if rain harmed your deck, wait until the rain stops and the water fully dries off the deck or woods. Brand certain to post pictures.
Reply to Deck Stain Help
Hello hither is a motion picture you lot were asking for 😊 I'm using Cabot clear woods protector on my backyard fence. It had only 30min to dry when it started raining. It rained pretty hard for about 3 to v minutes just this is normal weather condition hither I never know if it will pelting or non the weather changes then fast and then frequently. Whatever advice is greatly appreciated!
Writer
Respond to Lara Horn
Looks fine.
Sanded whole deck 80 grit , started to stain the deck and got one-half the deck done then took a pause for most 6 hours , got back to it and almost finished the other half when a downpour started . My question is exercise I but put a second glaze where it looks ok , strip away what looks bad and paint again ? Or exercise I strip whole deck with 80grit paper once again and start over ? Should I resand the areas that weren't painted or will it polish out once again afterward it drys for few days ? This is a solid Color wood oil based stain , should I just do two more than layers on the areas that await like they lifted up ?
Reply to Allen
The boards definitely aren't smooth to the bear upon as they used to be , even where the paint didn't lift seems to exist slights rough and coarse once again
Author
Answer to Allen
Rain volition not harm anything. Just go along to coat with the solid stain.
Respond to Deck Stain Help
Awesome thank you for the swift response ! So once it dries the lifted paint isn't at take a chance for a peeling issue and information technology should smoothen out again texture wise ? I loved how smooth it was after the sanding so I'd hate for that to be gone
Author
Reply to Allen
It would not hurt to pole sand the rough areas before finishing it up.
We have a 15 year old deck that had never been stained or sealed. Nosotros pressure washed and brightened information technology. On day one, we used Rustoleum deck start primer. 24-hour interval two nosotros began staining the floor of the deck with Cabot acrylic h2o based solid deck stain. Nosotros let it dry for four nearly five hours before it began raining. Then far, it looks fine, but we were planning to utilise a 2nd coat because there are some areas between the boards we missed and it looks slightly unfinished. Is this not a skilful idea once the deck dries out again? We simply don't desire it to peel if we add together too much stain and we saw that you said not to endeavor "touch on up" or "spot" staining.
Writer
Reply to Den
You can apply a 2nd glaze once it dries.
Source: https://www.deckstainhelp.com/it-rained-shortly-after-staining-what-to-do/
Pattie Lessel
1 calendar month agone
My deck has milky places all over it after the first rain after staining
It was several days so I don't know what could have acquired it
Delight assistance